List of Retrieved Variables
Primary variables
Table 1: List of atmospheric variables CLIMCAPS retrieves from the cloud cleared radiances
Retrieved Variable |
Units |
Fieldname |
Vertical grid |
Kelvin |
air_temp mw_air_temp |
air_pres |
|
molec/cm2 |
h2o_vap_mol_lay mw_h2o_vap_mol_lay |
air_pres_lay |
|
molec/cm2 |
o3_mol_lay |
air_pres_lay |
|
mol/mol |
co2_vmr |
air_pres |
|
molec/cm2 |
co_mol_lay |
air_pres_lay |
|
% |
cld_frac |
n/a |
|
Cloud liquid water |
molec/cm2 |
mw_h2o_liq_mol_lay |
air_pres_lay |
Pa |
for_cld_top_pres_2lay |
n/a |
|
molec/cm2 |
ch4_mol_lay |
air_pres_lay |
|
Nitric Acid |
molec/cm2 |
hno3_mol_lay |
air_pres_lay |
Nitrous Oxide |
molec/cm2 |
n2o_mol_lay |
air_pres_lay |
Sulphur Dioxide |
molec/cm2 |
so2_mol_lay |
air_pres_lay |
Surface emissivity |
n/a |
surf_ir_emis surf_mw_emis |
n/a |
Surface reflectivity |
n/a |
surf_ir_refl surf_mw_emis |
n/a |
Surface temperature |
Kelvin |
surf_temp mw_surf_temp |
n/a |
Derived variables
The CLIMCAPS netCDF files have several useful derived parameters, which are shown in Table 2. Derived variables are calculated from retrieved variables and may be useful for certain applications.
Table 2: List of variables derived from CLIMCAPS V2 retrieval variables (Table 1). This is not a complete list as the product file contains many derived variables. For a full list, please see the CLIMCAPS V2 product user guide.
Derived Variables |
Units |
Fieldname |
Vertical grid |
Methane mass mixing ratio at 400 hPa |
kg/kg |
ch4_mmr_midtrop |
n/a |
Cloud top temperature |
Kelvin |
cld_top_temp |
n/a |
Carbon monoxide mass mixing ratio at 500 hPa |
kg/kg |
co_mmr_midtrop |
n/a |
Geopotential height |
meter |
gp_hgt |
air_pres |
Ozone mass mixing ratio |
kg/kg |
o3_mmr |
air_pres |
Relative humidity |
% |
rel_hum |
air_pres_h2o |
Specific humidity |
kg/kg |
spec_hum mw_spec_hum |
air_pres_h2o |
Total column cloud liquid water |
Kg/m2 |
h2o_liq_tot |
n/a |
Total column ozone |
kg/m2 |
o3_tot |
n/a |
Total precipitable water |
kg/m2 |
h2o_vap_tot mw_h2o_vap_tot |
n/a |